Click image to view full size image
Rotogravure printing machine equipped with PLC (Siemens) controller 10 colors, mechanical shaft or shaftless
Quick Details:
| Number of the printing color | 10 colors ( there has 3-10 printing colors can be chosen) |
| Printing width | 700-1050mm (1250B:900-1250mm / 1500B: 1150-1500mm) |
| Suitable material | BOPET,BOPA,CPP,CPE,PVC |
| Thickness of the substrate | 10-60μm |
| Application area | printing lamination film product, surface printing product, transfer printing product |
| Max. working speed | 250m/min (diameter of the printing cylinder:φ150mm) |
| Diameter of the roll | Max.φ800mm |
| Diameter of the printing cylinder | φ120mmφ280mm(L=376.9mm879.62 mm) |
| Kinds of the solvent | solvent-based , water-based |
| Accuracy of the register | ≤±0.1mm |
| Power of the main machine | 185 kw ( not including the dry heat energy) |
| Power supply | 380VAC±10%,50±2Hz,three-phase five-wire |
| Power of the heating supply (oven) | Electric energy supply, steam supply, thermal conductive oil supply |
| Size( L × W × H) | 23700mm × 5000mm × 4315mm |
| Weight | 58 T |
| Optional function
| 1. printing unit servo driven 2. ink tray trolley 3. high-performance energy saving and consumption reducing system 4. UV printing unit, flexible printing unit 5. air floating reverse printing device 6. printing quality intelligent management system |
Summarize and function:
This machine is suitable for BOPP, PET, PVC, PE with good printing performance of drum-shaped material, combination of film, paper color printing. The machine equipped with PLC (Siemens) controller and touch screen user interface for machine operation
Core competition:
1. Ink blade body: blade adjust up and down and angle of squeegee pressure using two-cylinder horizontal moving motor cam.
2.Color manipulator: computer-controlled synchronous motor, by slowing rotating double
screw adjustment, and automatic registration.
3.Used double station, and received material frame, and put material used a,, and b motor, through frequency device control line number, preturned, and printing speed consistent, for cut knife, automatically for volume and automatically received material, put material used automatically tension control, host traction tension amount frequency control, traction by rich field motor, used Japan make warehouse over low friction cylinder, imports valve into had pendulum arm control line.Winding adopts moment electrical motor control.
4.Hosting by frequency conversion motor
5.Winding and rewinding traction adopts moment electrical motor control
6.Electric digital intelligent temperature controller
7. Printing color group can increase or decrease according to customer requirements, both sides may be one-off and continuous printing
8
PLC Controller 10 Colors Rotogravure Printing Machine With Mechanical Shaft Or Shaftless
